EO-1000 Rack Mountable OEO Converter

      HOPECOM EO-1000 Equipment is used for optical transmission signal amplification, shaping, relay, and mode conversion. It can achieve the continuous transmission of signal in different kind of fiber, converse between different signal wavelengths, and amplify optical signal. It can be widely used in single/multiple mode conversion, single/double fiber mode conversion, coarse wavelength division multiplexing system, dense wavelength division multiplexing, optical relay transmission and optical monitoring field.

Features
  • Protocol transparency: transparent transmission includes ATM, Gigabit Ethernet, STM-1/4/16/6, OC-3/12/48/192, FICON/ESCON/FIBRE Channel, DVB-ASI light signals and multiple protocols.
  • Bit rate transparent: transmitting, receiving rate: 100Mbps ~ 10Gbps.
  • Multiple wavelength access: multimode 850nm and 1310nm, single mode 1310nm, 1550nm, CWDM, DWDM.
  • The SFP/XFP module for high port density. Support hot swap.
  • The 3R relay function (optional)
  • The standard 19 inch rack mounted
  • Optional network management supported
  • Description
    Specification
    Order Infomation
    Application
    Download
    Faq

          HOPECOM EO-1000 Equipment is used for optical transmission signal amplification, shaping, relay, and mode conversion. It can achieve the continuous transmission of signal in different kind of fiber, converse between different signal wavelengths, and amplify optical signal. It can be widely used in single/multiple mode conversion, single/double fiber mode conversion, coarse wavelength division multiplexing system, dense wavelength division multiplexing, optical relay transmission and optical monitoring field.

    Features
  • Protocol transparency: transparent transmission includes ATM, Gigabit Ethernet, STM-1/4/16/6, OC-3/12/48/192, FICON/ESCON/FIBRE Channel, DVB-ASI light signals and multiple protocols.
  • Bit rate transparent: transmitting, receiving rate: 100Mbps ~ 10Gbps.
  • Multiple wavelength access: multimode 850nm and 1310nm, single mode 1310nm, 1550nm, CWDM, DWDM.
  • The SFP/XFP module for high port density. Support hot swap.
  • The 3R relay function (optional)
  • The standard 19 inch rack mounted
  • Optional network management supported
  • Optical parameters>

    Unit

    Parameter

    Center wavelength

    nm

    1310, 1550, or CWDM/DWDM wavelength

    Receiving wavelength

    Multimode

    nm

    1270 ~ 1610

    Single mode

    nm

    850/1310

    Transmitting optical
    power

    Multimode

    dBm

    -8 ~ -3

    Single mode

    dBm

    -6 ~ +2

    Min. receiving
    sensitivity

    Multimode

    dBm

    -18 (normal), -24 (enhanced)

    Single mode

    dBm

    1.25G: -31 (APD Receivers), -22 (PIN Receivers)
    2.5G: -28 (APD Receivers), -20 (PIN Receivers)
    10G: -26 (APD Receivers), -19(PIN Receivers)

    Optical interface

     

    LC/PC

     

    System parameter

    qualification

    Max. capacity

    10Gbps (1×10 Gbps)

    Wavelength range

    In accordance with ITU-T CWDM/DWCM standard

    Service access type

    PDHFICON/ESCON/FIBRE
    ChannelSTM-64/STM-16/STM-4/STM-1OC-192/OC-48/OC-12/OC-3
    Gigabit Ethernet100Mb/s - 10Gb/s

    Network topology supported

    Point to point, point to multipoint, chain type

    Using fiber number

    Single / double fiber

    Transmission fiber type

    G.652, G.655

    Operating temperature

    0 ~ 50 °C

    Operating humidity

    5%RH ~ 85%RH, No condensation

    Power consumption

    220VAC, 50Hz, or -48VDC

    Dimensions

    19” 1U rack mounted

  • Transparent transmission in metro optical network and optical access network
  • SAN, LAN, MAN point-to-point transparent transmission
  • Solve the fiber resource shortage problem in optical network